Parts for a Tuscan2
We have 38 parts for a Tuscan2.
DIFFERENTIAL BUSH : PART NO. TVR 013 (REPLACES R0063 AND R0064)
High quality polyurethane upgrade bush for differntial of Griffith (except very early models), Chimaera and all later models. Very easy to fit without the need for special tools. Three required per car; two at the front and one at the rear of the differential. PRICED PER BUSH
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, Cerbera SP6, Tuscan2, Sagaris
Price: £19.92
ex VAT £16.95
LIGHTENED SPEED SIX FLYWHEEL, PART NO RP023
Raceproved Speed Six Superlight Steel billet flywheels have been developed to increase engine performance. Horse power which would normally be absorbed by a heavy standard cast iron flywheel is now freed-up, and goes straight to the wheels. Extensive dyno testing has proven acceleration gains of 14 bhp over standard. A 39% weight reduction is achieved by using chromium molybendum steel instead of factory standard cast iron. Chromoly steel has fantastic tensile strength compared with iron, and therefore the flywheel is designed using much less material. Once machined, the flywheels are nitrided for durability, and to reduce wear from AP clutch butterfly spring contact. The starter ring gear is incorporated into the billet to produce an elegant one-piece flywheel. The gear tooth profile of our flywheels is bespoke, and has been optimised for the Speed Six. Our flywheels are made without compromise to the highest quality, giving your car a crisper throttle response and keen acceleration, whilst still retaining the smooth idle and superb driveability.
Fits: Tuscan, T350, Tamora, Cerbera SP6, Tuscan2, Sagaris
Price: £410.07
ex VAT £349.00
SPEED SIX FLYWHEEL, PART NO RP022
Raceproved standard weight flywheel, manufactured from Chromium Molybendum steel instead of standard cast iron. The starter ring gear is incorporated into the billet to produce an elegant one-piece flywheel. The gear tooth profile of our flywheels is bespoke, and has been optimised for the Speed Six. Fits all Speed Six models.
Fits: Tuscan, T350, Tamora, Cerbera SP6, Tuscan2, Sagaris
Price: £398.32
ex VAT £339.00
HELLA INDICATOR SMOKED, PART NO M1634
GEARBOX REMOTE BUSH, PART NO T51
POWER STEERING HOSE KIT: PART NO. H0636
OIL GAUGE PIPE, PART NO E3623
PROP SHAFT BOLT KIT: PART NO. BOLK1
It is always best to replace bolts that are under a lot of tension when doing work on your car and this particularly applies to the prop shaft. A complete kit of bolts for your peace of mind. PRICED PER KIT
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, M Series, Tasmin, Wedge, Cerbera SP6, S - Series, Tuscan2, Sagaris
Price: £5.88
ex VAT £5.00
CHROME VALVE CAPS : PART NO. VALV8
These extremely high quality dust caps are finished off with the TVR logo. They will really provide that finishing touch to your wheels. PRICED PER SET OF FOUR
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, M Series, Tasmin, Cerbera SP6, S - Series, Tuscan2, Sagaris
Price: £7.99
ex VAT £6.80
COASTER :PART NO. COAS1
These stylish coasters have been designed to look like a wheel centre with the TVR logo. Buy a set and impress your friends when you sit down together for a quiet drink after a drive. PRICED PER COASTER
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, M Series, Tasmin, Wedge, Cerbera SP6, S - Series, Tuscan2, Sagaris
Price: £4.11
ex VAT £3.50
FILTERMAG : PART NO. CTFM
Give your engine the ultimate in protection by clamping one of these simple but powerful magnetic devices to your oil canister. The Filtermag has an overall unidirectional magnetic force of several hundred pounds on one side while it will not hold a paperclip on the other. This extremely concentrated magnetic field not only secures the unit to the filter canister but also attracts all the metallic particles that the filter itself would not remove from the oil. The unit is fully re-usable and is just transferred from the old to new filter during a service. It will last for 50 years and maintains its magnetic strength even when the temperature exceeds 200F. This unit is a must for hard working engines and will significantly help reduce engine wear recovering the initial cost in no time at all. Comes complete with full instructions for use. IT DOES NOT REDUCE THE NEED FOR REGULAR SERVICING AND OIL CHANGES. BUY NOW AT OUR BARGAIN PRICE
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, M Series, Tasmin, Wedge, Cerbera SP6, S - Series, Tuscan2, Sagaris
Price: £37.01
ex VAT £31.50
TUSCAN REAR LIGHT COVER LEFTHAND: PART NO. U2648
TUSCAN REAR LIGHT COVER RIGHT HAND: PART NO. U2647
TUSCAN LOWER HEADLIGHT COVER LEFTHAND: PART NO. U2632
TUSCAN LOWER HEADLIGHT COVER RIGHTHAND: PART NO. U2631
TUSCAN UPPER HEADLIGHT COVER LEFTHAND; PART NO. U2619
TUSCAN UPPER HEADLIGHT COVER RIGHTHAND; PART NO. U2618
MAP SENSOR, PART NO E2661
LAMBDA SENSOR, PART NO M1444
WIPER MOTOR, PART NO M1246
HEADLAMP 90MM : PART NO. M1753
MIRRORED INDICATOR BULB: PART NO BUL006
When your car is fitted with clear indicators avoid the "fried egg" look with orange colored bulbs. These bulbs have offset pins suitable for installation in the models with plastic Hella lamps. For models with staight pins see BUL001. PRICED PER BULB
Fits: T350, Tamora, Tuscan2, Sagaris
Price: £5.82
ex VAT £4.95
HOSE AND CLIP SET: PART NO HK012
Complete silicone hose kit carefully manufactured for easy fitting. Supplied complete with all clips and instructions. Fits Tuscan Speed Six models.
Standard colour is blue but can be supplied in Purple, Green, Yellow or Red (special order approximately 4 weeks delivery). We can supply kits for the majority of TVR models; please contact us for details.
Fits: Tuscan, Tuscan2
Price: £162.74
ex VAT £138.50
THERMOSTAT STD 82 DEG BIG BORE, PART NO E2027
MINI SEALEY TROLLEY JACK: PART NO. JACK1
This is an extremely high quality mini trolley jack. It is manufactured from aluminium and is a fully operational minature version of a race mechanics trolley jack. Perfect in every respect and capable of lifting 100kgs. Pointless but perfect. Buy one now as stock is very limited and may not be repeated.
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, M Series, Tasmin, Wedge, Cerbera SP6, S - Series, Tuscan2, Sagaris
Price: £35.25
ex VAT £30.00
HEAVY BRUSHED PRO-STYLE BASEBALL CAP PART NO. HAT1
Top quality 100% heavy brushed cotton drill baseball cap. Self fabric strap with tri-glide buckle and sandwich peak. In black with silver TVR logo. LIMITED STOCK AT THIS PRICE
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, M Series, Tasmin, Wedge, Cerbera SP6, S - Series, Tuscan2, Sagaris
Price: £14.04
ex VAT £11.95
KEY RING: PART NO. KRB02
TEMPERATURE SENDER UNIT: PART NO M1275
THROTTLE CABLE REPAIR KIT, PART NO TVR047
FUEL FILTER, PART NO L0180
CAR MATS: PART NO. TCM001
High quality car mats custom made to fit your car perfectly. These mats are made to order and delivered to you direct from the manufacturer. They are available in a choice of 6 colours and 18 different bindings. They can also have either carpet heelpads or metal plates on driver side only or passenger side as well. There is a selection of logos available or you can design your own. Because of the number of options available we need you to complete a requirements form before we can process your order. Contact us for the requirements form and on its return we will calculate the total cost of the mats. Once we have received payment the order will be placed and the mats are normally delivered within five working days. PLEASE NOTE THAT BECAUSE THIS ITEM IS MADE TO ORDER IT IS NON-RETURNABLE UNLESS THERE IS A FAULT. Prices start at £60.00 + VAT per set We can also offer an additional service if you require mats made to match these for another part of your car such as the parcel shelf. If you provide us with a template of the area then we can obtain a price for a matching bespoke mat.
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, M Series, Tasmin, Wedge, Cerbera SP6, S - Series, Tuscan2, Sagaris
Price: £70.50
ex VAT £60.00
PROTECTIVE WING COVER, PART NO TVR044
Protect the paintwork on your car when working in the engine bay by using our exclusive wing cover. It provides ultimate protection against accidentally dropped tools and scratches from buttons, zips,buckles etc. It is simple and extremely easy to use as it simply drops onto the wing of a car and being made from rubber it naturally grips the vehicle bodywork without abrasion. As these wing covers are non-magnetic they will not upset any electronic controls in the engine bay or give mis-readings to analysis equipment being used. NOTE THIS COVER IS FULLY WASHABLE BUT IT MUST NOT BE TUMBLED, DRIP DRY ONLY. EXTRA SPECIAL OFFER - ONLY A FEW AT THIS PRICE.
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, M Series, Tasmin, Wedge, Cerbera SP6, S - Series, Tuscan2, Sagaris
Price: £14.04
ex VAT £11.95
GEARBOX INPUT SEAL: PART NO T45F054R
TAILSHAFT SEAL T5, PART NO T45F167R
RED COLOURED FOG LAMP BULB, PART NO BUL005
RADIATOR MOUNTING BOBBIN, PARTNO K0092
THERMOSTAT LOW TEMPERATURE 74 DEG PART NO. E2103
GEARBOX MOUNT : TVR PART NO. F0018
Gearbox mount for all models apart from Cerbera. For Cerbera see Part No. F0428
Fits: Tuscan, Griffith, T350, Chimaera, Tamora, M Series, Tasmin, Wedge, S - Series, Tuscan2, Sagaris
Price: £11.28
ex VAT £9.60
Please contact us for further information concerning availabilty or suitable application.