Parts for a Griffith
We have 214 parts for a Griffith.
DIFFERENTIAL OUTPUT SEAL: TVR PART NO. R0062
DIFFERENTIAL INPUT SEAL: TVR PART NO. R0061
DIFFERENTIAL BUSH : PART NO. TVR 013 (REPLACES R0063 AND R0064)
High quality polyurethane upgrade bush for differntial of Griffith (except very early models), Chimaera and all later models. Very easy to fit without the need for special tools. Three required per car; two at the front and one at the rear of the differential. PRICED PER BUSH
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, Cerbera SP6, Tuscan2, Sagaris
Price: £19.92
ex VAT £16.95
THROTTLE CABLE REPAIR KIT, PART NO TVR049
VENT, FACE LEVEL : PART NO. P0084
ROUND VENT,HEATER : PART NO. P0008
HOSE AND CLIP SET: PART NO HK001
Complete silicone hose kit carefully manufactured for easy fitting. Supplied complete with all clips and instructions. Fits Griffith pre-cat models. Throttle heater hose is an optional extra. Standard colour is blue but can be supplied in Purple, Green, Yellow or Red (special order approximately 4 weeks delivery). We can supply kits for the majority of TVR models; please contact us for details.
Fits: Griffith
Price: £146.88
ex VAT £125.00
HOSE AND CLIP SET: PART NO HK002
Complete silicone hose kit carefully manufactured for easy fitting. Supplied complete with all clips and instructions. Fits Griffith 500 pre-serpentine models.Throttle heater hose is an optional extra. Standard colour is blue but can be supplied in Purple, Green, Yellow or Red (special order approximately 4 weeks delivery). We can supply kits for the majority of TVR models; please contact us for details.
Fits: Griffith
Price: £132.78
ex VAT £113.00
RED REFLECTOR, PART NO M1303
Hella red rear reflector, with self adhesive pads. 60mm.
Fits: Griffith, Tamora
Price: £2.94
ex VAT £2.50
SIDE LAMP BULB HOLDER, PART NO TVR048
HELLA REVERSE LAMP, PART NO M1636
HELLA INDICATOR SMOKED, PART NO M1634
GEARBOX REMOTE BUSH, PART NO T51
IGNITION SWITCH, PART NO M0673
PROP SHAFT BOLT KIT: PART NO. BOLK1
It is always best to replace bolts that are under a lot of tension when doing work on your car and this particularly applies to the prop shaft. A complete kit of bolts for your peace of mind. PRICED PER KIT
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, M Series, Tasmin, Wedge, Cerbera SP6, S - Series, Tuscan2, Sagaris
Price: £5.88
ex VAT £5.00
CHROME VALVE CAPS : PART NO. VALV8
These extremely high quality dust caps are finished off with the TVR logo. They will really provide that finishing touch to your wheels. PRICED PER SET OF FOUR
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, M Series, Tasmin, Cerbera SP6, S - Series, Tuscan2, Sagaris
Price: £7.99
ex VAT £6.80
COASTER :PART NO. COAS1
These stylish coasters have been designed to look like a wheel centre with the TVR logo. Buy a set and impress your friends when you sit down together for a quiet drink after a drive. PRICED PER COASTER
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, M Series, Tasmin, Wedge, Cerbera SP6, S - Series, Tuscan2, Sagaris
Price: £4.11
ex VAT £3.50
FILTERMAG : PART NO. CTFM
Give your engine the ultimate in protection by clamping one of these simple but powerful magnetic devices to your oil canister. The Filtermag has an overall unidirectional magnetic force of several hundred pounds on one side while it will not hold a paperclip on the other. This extremely concentrated magnetic field not only secures the unit to the filter canister but also attracts all the metallic particles that the filter itself would not remove from the oil. The unit is fully re-usable and is just transferred from the old to new filter during a service. It will last for 50 years and maintains its magnetic strength even when the temperature exceeds 200F. This unit is a must for hard working engines and will significantly help reduce engine wear recovering the initial cost in no time at all. Comes complete with full instructions for use. IT DOES NOT REDUCE THE NEED FOR REGULAR SERVICING AND OIL CHANGES. BUY NOW AT OUR BARGAIN PRICE
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, M Series, Tasmin, Wedge, Cerbera SP6, S - Series, Tuscan2, Sagaris
Price: £37.01
ex VAT £31.50
TINTED HEADLAMP COVER LEFTHAND FOR GRIFFITH: PART NO. U0532
TINTED HEADLAMP COVER RIGHTHAND FOR GRIFFITH: PART NO. U0531
CLEAR HEADLAMP COVER LEFTHAND FOR GRIFFITH : PART NO. U0454
CLEAR HEADLAMP COVER RIGHTHAND FOR GRIFFITH : PART NO. U0453
Clear cover for righthand headlamp. Fits Grifith. See U0544 for lefthand cover.PLEASE ALLOW 14 DAYS FOR DELIVERY OF THIS ITEM
Fits: Griffith
Price: £48.61
ex VAT £41.37
WIPER MOTOR NEW, PART NO M0195
DOOR MIRROR OFFSIDE WITHOUT GLASS : PART NO. M0101XG
DOOR MIRROR NEARSIDE WITHOUT GLASS : PART NO. M0102XG
FRONT WHEEL BEARING KIT, PART NO C0004KL
Front wheel bearing kit, left hand, includes two bearings grease seal, grease and hub nut.
Price: £38.77
ex VAT £33.00
FRONT WHEEL BEARING KIT, PART NO C0004KR
Front wheel bearing kit, right hand, includes two bearings grease seal, grease and hub nut.
Price: £38.77
ex VAT £33.00
COOLING FAN, PART NO K0084
WATER PUMP GASKET, SERPENTINE, PART NO E0471
THERMOSTAT STD 82 DEG BIG BORE, PART NO E2027
STAINLESS STEEL ROCKER COVER BADGE : PART NO. RCB001
Polished rocker cover badges laser cut from stainles steel sheet for Rover engined models. They are negative cut so that the name shows the colour of rocker covers that have been powder coated. A superb enhancement to the look of your engine. PLEASE SELECT FROM 4.0, 5.0 or TVR WHEN PLACING YOUR ORDER.
Fits: Griffith, Chimaera, Wedge, S - Series
Price: £10.58
ex VAT £9.00
CERBERA, CHIMAERA,GRIFFITH ALLOY RADIATOR: PART NO. RT003
High quality, high efficieny alloy radiator that fits all models, both air-conditioning and no air-conditioning. Fitment is exactly as original. Complete with an aluminium cowl that has pre-threaded holes to accept fans(FANS NOT SUPPLIED)
Fits: Cerbera V8, Griffith, Chimaera, Cerbera SP6
Price: £446.50
ex VAT £380.00
WIPER MOTOR, RECONDITIONED, PART NO M0195R
Wiper motor reconditioned, no longer available new, some late Chimaeras will have the Bosch type wiper motor, this motor is fitted on the N/S inner wing, the price includes a £50.00 surcharge which is refunded when the old unit is returned and found to be suitable for reconditioning.
Fits: Cerbera V8, Griffith, Chimaera, Cerbera SP6
Price: £293.74
ex VAT £249.99
MINI SEALEY TROLLEY JACK: PART NO. JACK1
This is an extremely high quality mini trolley jack. It is manufactured from aluminium and is a fully operational minature version of a race mechanics trolley jack. Perfect in every respect and capable of lifting 100kgs. Pointless but perfect. Buy one now as stock is very limited and may not be repeated.
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, M Series, Tasmin, Wedge, Cerbera SP6, S - Series, Tuscan2, Sagaris
Price: £35.25
ex VAT £30.00
HEAVY BRUSHED PRO-STYLE BASEBALL CAP PART NO. HAT1
Top quality 100% heavy brushed cotton drill baseball cap. Self fabric strap with tri-glide buckle and sandwich peak. In black with silver TVR logo. LIMITED STOCK AT THIS PRICE
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, M Series, Tasmin, Wedge, Cerbera SP6, S - Series, Tuscan2, Sagaris
Price: £14.04
ex VAT £11.95
KEY RING: PART NO. KRB02
KEY RING: PART NO. KRB01
DRIVE SHAFT CV JOINT, PART NO R0040
BRAKE FLUID RESERVOIR CAP, PART NO J0090
DIFFERENTIAL DRAIN PLUG, PART NO R0296
MIRROR BASE, PART NO U0649
Mirror base repair, can be used to repair mirror if chassis is not broken.
Price: £9.26
ex VAT £7.88
Please contact us for further information concerning availabilty or suitable application.
FUEL CAP, PART NO L0069
OIL FILTER, PART NO E2117
DRIVE BELT, PRE SERPENTINE: PART NO E0120
CAR MATS: PART NO. TCM001
High quality car mats custom made to fit your car perfectly. These mats are made to order and delivered to you direct from the manufacturer. They are available in a choice of 6 colours and 18 different bindings. They can also have either carpet heelpads or metal plates on driver side only or passenger side as well. There is a selection of logos available or you can design your own. Because of the number of options available we need you to complete a requirements form before we can process your order. Contact us for the requirements form and on its return we will calculate the total cost of the mats. Once we have received payment the order will be placed and the mats are normally delivered within five working days. PLEASE NOTE THAT BECAUSE THIS ITEM IS MADE TO ORDER IT IS NON-RETURNABLE UNLESS THERE IS A FAULT. Prices start at £60.00 + VAT per set We can also offer an additional service if you require mats made to match these for another part of your car such as the parcel shelf. If you provide us with a template of the area then we can obtain a price for a matching bespoke mat.
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, M Series, Tasmin, Wedge, Cerbera SP6, S - Series, Tuscan2, Sagaris
Price: £70.50
ex VAT £60.00
TEMPERATURE SENDER: PART NO N0103
SUMP DRAIN PLUG, PART NO TVR045
The sump plug on Rover V8s can be difficult to undo unless you have the right size spanner and the space to use it. The standard plug can also be damaged by sleeping policeman and other low obstacles due the hexangonal shape. The edge can catch and be moved. The magnetic plug plug uses a different design with a 10mm Allen recessed socket that makes removal easier. The circular profile reduces the risk of the plug being caught, moved and causing an oil leak. The plug is also fitted with a magnetic tip to trap any iron or steel debris that might be contained in the oil. This debris can be removed from the plug during routine oil changes.
Fits: Griffith, Chimaera, S - Series
Price: £8.52
ex VAT £7.25
PROTECTIVE WING COVER, PART NO TVR044
Protect the paintwork on your car when working in the engine bay by using our exclusive wing cover. It provides ultimate protection against accidentally dropped tools and scratches from buttons, zips,buckles etc. It is simple and extremely easy to use as it simply drops onto the wing of a car and being made from rubber it naturally grips the vehicle bodywork without abrasion. As these wing covers are non-magnetic they will not upset any electronic controls in the engine bay or give mis-readings to analysis equipment being used. NOTE THIS COVER IS FULLY WASHABLE BUT IT MUST NOT BE TUMBLED, DRIP DRY ONLY. EXTRA SPECIAL OFFER - ONLY A FEW AT THIS PRICE.
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, M Series, Tasmin, Wedge, Cerbera SP6, S - Series, Tuscan2, Sagaris
Price: £14.04
ex VAT £11.95
DISTRIBUTOR SPANNER SET: PART NO TVR043
Because the V8 Rover distributor is sandwiched between the water pump and the engine block it's almost impossible to get a socket or spanner on for removal or adjustment. This special type spanner not only allows for simple accessibility it is also suitable for all 3/8" drive socket wrenches too.
Fits: Griffith, Chimaera, M Series, Wedge
Price: £16.45
ex VAT £14.00
WINDSREEN WASHER MOTOR AND PUMP, PART NO TVR042
WASHER BOTTLE CAP, PART NO M0667
GEARBOX INPUT SEAL: PART NO T45F054R
GEARBOX TAILSHAFT SEAL, PART NO T45F043R
EXHAUST MANIFOLD BOLT KIT: PART NO TVR041
O/S DOOR MIRROR GLASS, PART NO S29U10308
EXHAUST MOUNTING RUBBER, PART NO S0169
RADIATOR MOUNTING BOBBIN, PARTNO K0092
DOUBLE ADJUSTABLE S/ABS & SPRING SET, PART NO PT2
PRO-TECH SHOCKS 600 SERIES are made from 52 M/M diameter 6262 specification aluminium with adjustable spring seat platform for 2 ¼" I.D. springs. The 600 SERIES has independent bump and rebound adjustment, this allowed valving changes to be made at all shaft velocities without effecting the other valving adjustments. These shocks will give you the advantage over the competition at which a tyre is loaded or unloaded during dynamic weight transfer. Dynamic weight transfer is the transferring of weight from side to side during cornering, from rear to front during deceleration and from front to rear during acceleration. By changing the stiffness of the shock's independently on the racecar, we are adjusting the loadings on the tyres at different points on the racetrack, if done correctly good handling will result in getting you to the chequered flag first! All units are hand built and come complete with all fittings and springs, allow 10 days delivery. Please specify vehicle details when ordering.
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Cerbera SP6
Price: £1092.75
ex VAT £930.00
PROTECH SHOCK ABSORBER/SPRING SET, PART NO PT1
Protech shock absorbers, are a high quality product suitable for fast road use and track days, at an affordable price and come complete with springs, adjustable spring platforms and adjustable damping. The control knob has only 13 click settings with a total movement of 300 degrees (less than one turn). A new internal sealing system is designed to eliminate high pressure bleeding so all movement of oil in bump and rebound is consistently controlled through the piston and base valve. These units are ultra light weight all aluminium design and the components used are C.N.C machined to a very high standard, they are then anodised in clear and black to give maximum protection and presentation. (All units are hand built to order). Please specify details of the car when ordering, allow 10 days delivery, comes complete ready to fit, with 3 years warranty. Suitable for Griffith, Chimaera, Cerbera, Tuscan, T350.
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Cerbera SP6
Price: £670.93
ex VAT £571.00
HEADLAMP ADJUSTERS 70MM KIT, PART NO TVR039
MIRRORED REPEATER BULB, PART NO BUL002
HOSE AND CLIP SET: PART NO HK003
Complete silicone hose kit carefully manufactured for easy fitting. Supplied complete with all clips and instructions. Fits Griffith 500 Serpentine.Standard colour is blue but can be supplied in Purple, Green, Yellow or Red (special order approximately 4 weeks delivery). Kits supplied for most other TVR models, please contact us for details.
Fits: Griffith
Price: £148.05
ex VAT £126.00
WASHER TUBING: PART NO M0328.
BODY AND HOOP SEAL, TVR PART U0372.
DIFFERENTIAL MOUNTING BUSH, PART NO R0055
COOLING FAN, PART NO K0072
REFLECTIVE HEAT MAT, PART NO S0039
Heat reflective mat, 1mm thick x 1 metre wide woven fibreglass mat with reflective surface. Suitable for making under bonnet and bulkhead heat shields. SOLD PER SQUARE METRE. Fix in place with High Temperature Silicone (Part No. TVR028) and cover joins with Aluminium Foil Tape (Part No. MS025)
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, M Series, Tasmin, Wedge, Cerbera SP6, S - Series
Price: £33.78
ex VAT £28.75
EXPANSION VALVE, PART NO P0224
OIL FILLER CAP, PART NO 025E018A
DIFFERENTIAL FILLER PLUG, PART NO R0299
DIFFERENTIAL REAR COVER, PART NO TVR034
WINDOW LIFT MOTOR, PART NO TVR033
PIPERCROSS PERFORMANCE AIR FILTER, PART NO PCE0046
A new range of performance air filters, manufactured by Pipercross, using multiple layers of patented open-cell polyurethane foam, whilst maintaining maximum engine protection. Fits early Griffith, later cars have the panel style filter.
Price: £34.85
ex VAT £29.66
DAMPER BUSH, PART NO C0092
MIRRORED INDICATOR BULB, PART NO BUL001
REAR ANTI ROLL BAR DROP LINKS: PART NO LD0096
Rear suspension anti roll bar drop link set.A high quality up-grade manufactured in stainless steel. Complete and ready to bolt on. PRICED PER PAIR.
Price: £88.13
ex VAT £75.00
Please contact us for further information concerning availabilty or suitable application.
STEERING RACK PINION SEAL, PART NO H0293
285MM FRONT BRAKE UPGRADE, PART NO HS001
Front brake upgrade kit, manufactured by Hispec, kit includes pair of 285mm grooved discs, braided hoses, brackets and hardware, fast road brake pad set, and a pair of four pot callipers, anodised in black, red or gold, fits all options of Griffith and Chimaera regardless of original brake size, can also be supplied with matching rear callipers and pads if required, please contact us for details, or go the whole way and fit matching rear callipers too.
Price: £680.52
ex VAT £579.17
Please contact us for further information concerning availabilty or suitable application.