Parts for a M Series
We have 29 parts for a M Series.
PROP SHAFT BOLT KIT: PART NO. BOLK1
It is always best to replace bolts that are under a lot of tension when doing work on your car and this particularly applies to the prop shaft. A complete kit of bolts for your peace of mind. PRICED PER KIT
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, M Series, Tasmin, Wedge, Cerbera SP6, S - Series, Tuscan2, Sagaris
Price: £5.88
ex VAT £5.00
CHROME VALVE CAPS : PART NO. VALV8
These extremely high quality dust caps are finished off with the TVR logo. They will really provide that finishing touch to your wheels. PRICED PER SET OF FOUR
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, M Series, Tasmin, Cerbera SP6, S - Series, Tuscan2, Sagaris
Price: £7.99
ex VAT £6.80
COASTER :PART NO. COAS1
These stylish coasters have been designed to look like a wheel centre with the TVR logo. Buy a set and impress your friends when you sit down together for a quiet drink after a drive. PRICED PER COASTER
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, M Series, Tasmin, Wedge, Cerbera SP6, S - Series, Tuscan2, Sagaris
Price: £4.11
ex VAT £3.50
FILTERMAG : PART NO. CTFM
Give your engine the ultimate in protection by clamping one of these simple but powerful magnetic devices to your oil canister. The Filtermag has an overall unidirectional magnetic force of several hundred pounds on one side while it will not hold a paperclip on the other. This extremely concentrated magnetic field not only secures the unit to the filter canister but also attracts all the metallic particles that the filter itself would not remove from the oil. The unit is fully re-usable and is just transferred from the old to new filter during a service. It will last for 50 years and maintains its magnetic strength even when the temperature exceeds 200F. This unit is a must for hard working engines and will significantly help reduce engine wear recovering the initial cost in no time at all. Comes complete with full instructions for use. IT DOES NOT REDUCE THE NEED FOR REGULAR SERVICING AND OIL CHANGES. BUY NOW AT OUR BARGAIN PRICE
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, M Series, Tasmin, Wedge, Cerbera SP6, S - Series, Tuscan2, Sagaris
Price: £37.01
ex VAT £31.50
MINI SEALEY TROLLEY JACK: PART NO. JACK1
This is an extremely high quality mini trolley jack. It is manufactured from aluminium and is a fully operational minature version of a race mechanics trolley jack. Perfect in every respect and capable of lifting 100kgs. Pointless but perfect. Buy one now as stock is very limited and may not be repeated.
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, M Series, Tasmin, Wedge, Cerbera SP6, S - Series, Tuscan2, Sagaris
Price: £35.25
ex VAT £30.00
HEAVY BRUSHED PRO-STYLE BASEBALL CAP PART NO. HAT1
Top quality 100% heavy brushed cotton drill baseball cap. Self fabric strap with tri-glide buckle and sandwich peak. In black with silver TVR logo. LIMITED STOCK AT THIS PRICE
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, M Series, Tasmin, Wedge, Cerbera SP6, S - Series, Tuscan2, Sagaris
Price: £14.04
ex VAT £11.95
KEY RING: PART NO. KRB02
Heavy quality key ring. Keep all your TVR keys safe.
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, M Series, Tasmin, Wedge, Cerbera SP6, S - Series, Tuscan2, Sagaris
Price: £7.64
ex VAT £6.50
KEY RING: PART NO. KRB01
Heavy quality key ring. Keep all your TVR keys safe.
Fits: Cerbera V8, Griffith, Chimaera, M Series, Cerbera SP6, S - Series
Price: £7.64
ex VAT £6.50
CAR MATS: PART NO. TCM001
High quality car mats custom made to fit your car perfectly. These mats are made to order and delivered to you direct from the manufacturer. They are available in a choice of 6 colours and 18 different bindings. They can also have either carpet heelpads or metal plates on driver side only or passenger side as well. There is a selection of logos available or you can design your own. Because of the number of options available we need you to complete a requirements form before we can process your order. Contact us for the requirements form and on its return we will calculate the total cost of the mats. Once we have received payment the order will be placed and the mats are normally delivered within five working days. PLEASE NOTE THAT BECAUSE THIS ITEM IS MADE TO ORDER IT IS NON-RETURNABLE UNLESS THERE IS A FAULT. Prices start at £60.00 + VAT per set We can also offer an additional service if you require mats made to match these for another part of your car such as the parcel shelf. If you provide us with a template of the area then we can obtain a price for a matching bespoke mat.
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, M Series, Tasmin, Wedge, Cerbera SP6, S - Series, Tuscan2, Sagaris
Price: £70.50
ex VAT £60.00
PROTECTIVE WING COVER, PART NO TVR044
Protect the paintwork on your car when working in the engine bay by using our exclusive wing cover. It provides ultimate protection against accidentally dropped tools and scratches from buttons, zips,buckles etc. It is simple and extremely easy to use as it simply drops onto the wing of a car and being made from rubber it naturally grips the vehicle bodywork without abrasion. As these wing covers are non-magnetic they will not upset any electronic controls in the engine bay or give mis-readings to analysis equipment being used. NOTE THIS COVER IS FULLY WASHABLE BUT IT MUST NOT BE TUMBLED, DRIP DRY ONLY. EXTRA SPECIAL OFFER - ONLY A FEW AT THIS PRICE.
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, M Series, Tasmin, Wedge, Cerbera SP6, S - Series, Tuscan2, Sagaris
Price: £14.04
ex VAT £11.95
DISTRIBUTOR SPANNER SET: PART NO TVR043
Because the V8 Rover distributor is sandwiched between the water pump and the engine block it's almost impossible to get a socket or spanner on for removal or adjustment. This special type spanner not only allows for simple accessibility it is also suitable for all 3/8" drive socket wrenches too.
Fits: Griffith, Chimaera, M Series, Wedge
Price: £16.45
ex VAT £14.00
O/S DOOR MIRROR GLASS, PART NO S29U10308
O/S door mirror glass, complete with backing, without heating element, often melting glue allowing the glass to drop, now becoming difficult to get, limited stock available.
Fits: Griffith, Chimaera, M Series
Price: £27.03
ex VAT £23.00
REFLECTIVE HEAT MAT, PART NO S0039
Heat reflective mat, 1mm thick x 1 metre wide woven fibreglass mat with reflective surface. Suitable for making under bonnet and bulkhead heat shields. SOLD PER SQUARE METRE. Fix in place with High Temperature Silicone (Part No. TVR028) and cover joins with Aluminium Foil Tape (Part No. MS025)
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, M Series, Tasmin, Wedge, Cerbera SP6, S - Series
Price: £33.78
ex VAT £28.75
HORN LOW TONE, PART NO M0131
Horn low tone, fit's all models.
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, M Series, Tasmin, Wedge, Cerbera SP6, S - Series
Price: £13.28
ex VAT £11.30
HORN HIGH TONE, PART NO M0130
Horn high tone, fit's all models.
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, M Series, Tasmin, Cerbera SP6, S - Series
Price: £13.28
ex VAT £11.30
SILICONE SEALANT PART NO TVR028
Silicone sealant, professional grade. Suitable for use as instant gasket as used on the AJP V8 and Speed Six engines. Also suitable for fixing Reflective Heat Matting (Part No. S0039) plus a variety of other uses on TVR's. Fits standard skeleton gun (available from us - please contact us for details and price).
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, M Series, Tasmin, Wedge, Cerbera SP6, S - Series
Price: £11.16
ex VAT £9.50
CYLINDER HEAD GASKET TVR PART NO. E2085
Cylinder Head Gasket fits Rover V8 Griffith and Chimaera - all variations
Fits: Griffith, M Series, S - Series
Price: £15.98
ex VAT £13.60
ROVER V8 HYDRAULIC LIFTER TVR PART NO. E0274
Hydraulic Lifter fits all Rover V8 engines
Fits: Griffith, Chimaera, M Series, Tasmin, Wedge, S - Series
Price: £7.64
ex VAT £6.50
GLOVE BOX CATCH PART NO U0859
GLOVE BOX CATCH Part No U0859
Fits: M Series, Tasmin, Wedge, S - Series
Price: £5.40
ex VAT £4.60
OIL PRESSURE SWITCH PART NO N0143
Oil pressure warning lamp switch for all Rover V8 engines fits V8 S, Griffith & Chimaera
Fits: Griffith, Chimaera, M Series, Tasmin, Wedge, S - Series
Price: £11.28
ex VAT £9.60
SUMP PLUG WASHER PART NO 035E255A
Sump plug sealing washer, fits all Rover V8 engines, V8 S, Griffith, Chimaera.
Fits: Griffith, Chimaera, M Series, Tasmin, Wedge, S - Series
Price: £1.18
ex VAT £1.00
UPPER BALL JOINT SPACER PART NO C0948
Upper ball joint spacer 3mm two (one each side) used to replace original single 6mm spacer when using later type ball joint.
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, M Series, Tasmin, Wedge, Cerbera SP6, S - Series
Price: £2.40
ex VAT £2.04
OIL PRESSURE SENDER FOR CAERBONT OIL GAUGE TVR PART NO. N0126
Oil Pressure sender for Caerbont Gauges
Fits: Cerbera V8, Griffith, T350, Chimaera, Tamora, M Series, Tasmin, Cerbera SP6, S - Series
Price: £53.20
ex VAT £45.28
Please contact us for further information concerning availabilty or suitable application.
OIL PRESSURE SENDER FOR EARLY STEWART WARNER GAUGES TVR PART NO. N0009
Oil Pressure sender for early Stewart Warner Gauges
Fits: M Series, Tasmin, Wedge, S - Series
Price: £40.83
ex VAT £34.75
VALVE COVER GASKET ROVER V8 (RUBBER) TVR PART NO. E3458
Valve cover gasket for Rover V8. Top quality Viton rubber, direct replacement for old cork gaskets
Fits: Griffith, Chimaera, M Series, Tasmin, Wedge, S - Series
Price: £8.13
ex VAT £6.92
PLUG SUPPRESSOR EXTENSION. FITS ALL ROVER V8 MODELS TVR PART NO. E0142
Spark plug suppressor extension. Fits all Rover V8 Models
Fits: Griffith, Chimaera, M Series, Tasmin, Wedge, S - Series
Price: £5.82
ex VAT £4.95
GEARBOX MOUNT : TVR PART NO. F0018
Gearbox mount for all models apart from Cerbera. For Cerbera see Part No. F0428
Fits: Tuscan, Griffith, T350, Chimaera, Tamora, M Series, Tasmin, Wedge, S - Series, Tuscan2, Sagaris
Price: £11.28
ex VAT £9.60
Please contact us for further information concerning availabilty or suitable application.
FULL NITRON DAMPER KIT WITH REMOTE RESERVOIRS
Remote Reservoir variant. Please contact us for pricing and availability.
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, M Series, Tasmin, Wedge, Cerbera SP6, S - Series
Please contact us for further information concerning availabilty or suitable application.
BASIC NITRON SUSPENSION KIT
Nitron Damper kit as fitted to all the best TVR's. Please contact us for pricing and availabilty.
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, M Series, Tasmin, Wedge, Cerbera SP6, S - Series
Please contact us for further information concerning availabilty or suitable application.
