Rear Suspension
REAR ANTI ROLL BAR DROP LINKS: PART NO. LD0332
Rear suspension anti roll bar drop link set. A high quality upgrade manufactured in stainless steel. Complete and ready to bolt on. PRICED PER PAIR
Fits: Cerbera V8
Price: £88.13
ex VAT £75.00
REAR ANTI ROLL BAR DROP LINKS: PART NO. LD0345
Rear suspension anti roll bar drop link set. A high quality upgrade manufactured in stainless steel. Complete and ready to bolt on. Suitable for most Speed Six models but please check with us before placing order. PRICED PER PAIR
Fits: T350, Tamora, Cerbera SP6, Sagaris
Price: £88.13
ex VAT £75.00
MINI SEALEY TROLLEY JACK: PART NO. JACK1
This is an extremely high quality mini trolley jack. It is manufactured from aluminium and is a fully operational minature version of a race mechanics trolley jack. Perfect in every respect and capable of lifting 100kgs. Pointless but perfect. Buy one now as stock is very limited and may not be repeated.
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, M Series, Tasmin, Wedge, Cerbera SP6, S - Series, Tuscan2, Sagaris
Price: £35.25
ex VAT £30.00
30-LED WORKLIGHT: PART NO. MS033
This superb worklight is 24cms long and has a 30-LED array to throw light into the darkest corner. It has a hanging hook and is magnetic on the back leaving you with both hands free to work. It uses 6 x AAA 500mAH Ni-MH rechargeable batteries and comes complete with cigarette lighter plug and a mains adaptor. Buy one now and shed some light on things during these dark evenings!
Price: £29.32
ex VAT £24.95
DOUBLE ADJUSTABLE S/ABS & SPRING SET, PART NO PT2
PRO-TECH SHOCKS 600 SERIES are made from 52 M/M diameter 6262 specification aluminium with adjustable spring seat platform for 2 ¼" I.D. springs. The 600 SERIES has independent bump and rebound adjustment, this allowed valving changes to be made at all shaft velocities without effecting the other valving adjustments. These shocks will give you the advantage over the competition at which a tyre is loaded or unloaded during dynamic weight transfer. Dynamic weight transfer is the transferring of weight from side to side during cornering, from rear to front during deceleration and from front to rear during acceleration. By changing the stiffness of the shock's independently on the racecar, we are adjusting the loadings on the tyres at different points on the racetrack, if done correctly good handling will result in getting you to the chequered flag first! All units are hand built and come complete with all fittings and springs, allow 10 days delivery. Please specify vehicle details when ordering.
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Cerbera SP6
Price: £1092.75
ex VAT £930.00
PROTECH SHOCK ABSORBER/SPRING SET, PART NO PT1
Protech shock absorbers, are a high quality product suitable for fast road use and track days, at an affordable price and come complete with springs, adjustable spring platforms and adjustable damping. The control knob has only 13 click settings with a total movement of 300 degrees (less than one turn). A new internal sealing system is designed to eliminate high pressure bleeding so all movement of oil in bump and rebound is consistently controlled through the piston and base valve. These units are ultra light weight all aluminium design and the components used are C.N.C machined to a very high standard, they are then anodised in clear and black to give maximum protection and presentation. (All units are hand built to order). Please specify details of the car when ordering, allow 10 days delivery, comes complete ready to fit, with 3 years warranty. Suitable for Griffith, Chimaera, Cerbera, Tuscan, T350.
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Cerbera SP6
Price: £670.93
ex VAT £571.00
LA-CO RUST BUSTER: PART NO MS012
Rust Buster quickly loosens rusted bolts, screws, shafts, piping etc. Contains no acid, alkali or other harmful ingredients. Safe for clothes, metals and friction-type surfaces. Comes in a 4fl.oz. container with a 7" telescopic flexible spout for ease of application.
Price: £2.64
ex VAT £2.25
MILLERS RED RUBBER GREASE: PART NO MS011
This is a vegetable based grease that is ideal for use when assembling components that are in contact with rubber. The formulation of the product prevents the rubber from swelling or hardening. Use to assemble brake and clutch components or on suspension rubbers. Suplied in a 500gm tub.
Price: £7.64
ex VAT £6.50
RED LINE SYNTHETIC GREASE: PART NO MS004
Synthetic high-performance extreme pressure grease provides high temperature and high load protection and low-temperature flow, and a very high drop point. Used for racing drive shafts and bearings. It is important to thoroughly clean out old grease to minimize the possibility of incompatibility. Supplied in 397g container.
Price: £17.57
ex VAT £14.95
DAMPER BUSH, PART NO C0092
Original damper bush for Bilstien shocks.
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, Cerbera SP6
Price: £8.85
ex VAT £7.53
REAR ANTI ROLL BAR DROP LINKS: PART NO LD0096
Rear suspension anti roll bar drop link set.A high quality up-grade manufactured in stainless steel. Complete and ready to bolt on. PRICED PER PAIR.
Price: £88.13
ex VAT £75.00
Please contact us for further information concerning availabilty or suitable application.
REAR SUSPENSION BUSH, PART NO D0104
Rear suspension bush fitted to rear upper wishbone, two per car, original equipment.
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, Cerbera SP6
Price: £13.51
ex VAT £11.50
SUSPENSION BUSH, PART NO C0200
Long suspension bush, original equipment, fitted on front and rear suspension.
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, Cerbera SP6
Price: £4.52
ex VAT £3.85
TYRE VALVE CHROME, PART NO G0137
Tyre valve and sleeve, as fitted to Spider wheels. NOTE THAT THE PRICE IS PER TYRE VALVE. Why not add a set of chrome caps; see item VALV1
Fits: Cerbera V8, Tuscan, T350, Tamora, Cerbera SP6
Price: £3.35
ex VAT £2.85
SUSPENSION BUSH THRUST WASHER, PART NO C0192
Suspension bush thrust washer, original equipment as fitted to all vehicles from Griffith onwards using standard suspension bushes.
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, Cerbera SP6
Price: £1.65
ex VAT £1.40
AVO SHOCK ABSORBER
Avo shock absorbers are very close to the original equipment in both performance and quality. They have the added benefits of height adjustable platforms and an easily adjustable damping rate. This makes them suitable both for driving to and from work or on track days. They come fully assembled and complete with bushes, and with a two year warranty.
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, Cerbera SP6, S - Series
Please contact us for further information concerning availabilty or suitable application.
REAR ANTI-ROLL BAR DROP LINK BUSH TVR PART NO. D0095
Anti-roll bar Drop Link Rubber Bush. Fits Griffith, Chimaera and early Cerbera.
Fits: Cerbera V8, Griffith, Chimaera, Cerbera SP6
Price: £1.82
ex VAT £1.55
WHEEL BEARING KIT TVR PART NO. D0057K
Rear wheel bearing kit. Includes 2 bearings, 1 oil seal + left and right hand threaded nuts. Fits Griffith and Chimera models. Please specify left or right wheel.
Price: £50.64
ex VAT £43.10
UPPER BALL JOINT SPACER PART NO C0948
Upper ball joint spacer 3mm two (one each side) used to replace original single 6mm spacer when using later type ball joint.
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, M Series, Tasmin, Wedge, Cerbera SP6, S - Series
Price: £2.40
ex VAT £2.04
LOWER BALL JOINT GRIFFITH & CHIMAERA TVR PART NO. C0036
Raceproved Lower ball joint for Griffith & Chimaera. No longer available from TVR
Price: £32.90
ex VAT £28.00
Please contact us for further information concerning availabilty or suitable application.
UPPER BALL JOINT GRIFFITH & CHIMAERA TVR PART NO. C0035
FULL NITRON DAMPER KIT WITH REMOTE RESERVOIRS
Remote Reservoir variant. Please contact us for pricing and availability.
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, M Series, Tasmin, Wedge, Cerbera SP6, S - Series
Please contact us for further information concerning availabilty or suitable application.
BASIC NITRON SUSPENSION KIT
Nitron Damper kit as fitted to all the best TVR's. Please contact us for pricing and availabilty.
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, M Series, Tasmin, Wedge, Cerbera SP6, S - Series
Please contact us for further information concerning availabilty or suitable application.
