Steering
ELECTRIC POWER STEERING PUMP : TVR PART NO. H0758
One piece electro-hydraulic pump as fitted to T350, Tamora, and Sagaris. The reservoir of this unit is fitted directly to the rear of the pump. If the return pipe inlet is in the wrong position it is an easy job to swap reservoirs. Can also be used to upgrade any vehicle to electric power steering.
Fits: T350, Tamora, Sagaris
Price: £414.00
ex VAT £360.00
STEERING LOCK STOP, PART NO H0756
Steering lock stop, used to stop tyres fouling the suspension when larger wheels are used, normally one used per side, but more can be fitted, priced each.
Fits: Cerbera V8, Tuscan, T350, Tamora, Cerbera SP6, Tuscan2, Sagaris
Price: £6.90
ex VAT £6.00
POWER STEERING HOSE KIT: PART NO. H0636
Complete Power Steering Hose Kit suitable for Cerbera and Tuscan models that have non-electric power steering.
Fits: Cerbera V8, Tuscan, T350, Tamora, Cerbera SP6, Tuscan2, Sagaris
Price: £74.75
ex VAT £65.00
30-LED WORKLIGHT: PART NO. MS033
This superb worklight is 24cms long and has a 30-LED array to throw light into the darkest corner. It has a hanging hook and is magnetic on the back leaving you with both hands free to work. It uses 6 x AAA 500mAH Ni-MH rechargeable batteries and comes complete with cigarette lighter plug and a mains adaptor. Buy one now and shed some light on things during these dark evenings!
Price: £28.69
ex VAT £24.95
TRACK ROD END, PART NO H0314
Track rod end, for all later cars.
Fits: Cerbera V8, Tuscan, T350, Tamora, Cerbera SP6
Price: £17.25
ex VAT £15.00
LA-CO RUST BUSTER: PART NO MS012
Rust Buster quickly loosens rusted bolts, screws, shafts, piping etc. Contains no acid, alkali or other harmful ingredients. Safe for clothes, metals and friction-type surfaces. Comes in a 4fl.oz. container with a 7" telescopic flexible spout for ease of application.
Price: £2.59
ex VAT £2.25
Please contact us for further information concerning availabilty or suitable application.
STEERING RACK PINION SEAL, PART NO H0293
Power steering rack pinion seal for all alluminium power steerins racks.
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, Cerbera SP6
Price: £9.22
ex VAT £8.02
LOWER BALL JOINT PART NO C0164
Lower ball joint, high quality replacement.
Fits: Cerbera V8, Tuscan, T350, Tamora, Cerbera SP6
Price: £33.93
ex VAT £29.50
POWER STEERING PUMP. TVR PART NO. H0373
Power steering pump. New, built by ZF. Fits Griffith, Chimaera, Cerbera and Tuscan - all models up to electric pump.Please contact us for further details and availability.
Fits: Cerbera V8, Tuscan, Griffith, Chimaera, Cerbera SP6
Price: £263.35
ex VAT £229.00
POWER STEERING HOSE TVR PART NO. H0279
STEERING RACK GAITER KIT POWER ASSISTED STEERING TVR PART NO H0295
Steering rack gaiter kit including ties for POWER ASSISTED STEERING racks. Fits Griffith, Chimaera, Cerbera , Tuscan, Tamora, T350
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, Cerbera SP6, Tuscan2
Price: £14.38
ex VAT £12.50
TRACK ROD END PART NO H0068
STEERING COLUMN COUPLING PART NO H0359
Steering column coupling Griffith & Chimaera. This universal joint is approximately 115mm in length and has 2 different splines of about 9/16" and 3/4" in diameter in each end. Always check dimensions of joints before ordering, as there is no rule of thumb for specific models.
Price: £41.88
ex VAT £36.42
STEERING COLUMN COUPLING PART NO H0073
Steering column coupling 82mm long takes shaft size 13mm and 13mm fits Griffith & Chimaera Always check dimensions of joints before ordering, as there is no rule of thumb for specific models.
Price: £32.78
ex VAT £28.50
STEERING COLUMN COUPLING PART NO H0072
Steering column coupling 82mm long takes shaft size 13mm one end 18mm other end fits Griffith Chimaera Cerbera Always check dimensions of joints before ordering, as there is no rule of thumb for specific models.
Fits: Cerbera V8, Griffith, Chimaera, Cerbera SP6
Price: £45.43
ex VAT £39.50
STEERING COLUMN COUPLING UPPER PART NO S28H10039
Steering column coupling upper fits S models
Fits: S - Series
Price: £57.12
ex VAT £49.67
UPPER BALL JOINT SPACER PART NO C0948
Upper ball joint spacer 3mm two (one each side) used to replace original single 6mm spacer when using later type ball joint.
Fits: Cerbera V8, Tuscan, Griffith, T350, Chimaera, Tamora, M Series, Tasmin, Wedge, Cerbera SP6, S - Series
Price: £2.35
ex VAT £2.04
